Menu
△ Rechargeable and Waterproof: Classic remote with new cute buttons is rechargeable, IP7 waterproof degree for the collar, it’s rainproof, but do NOT submerge in water for a long time.
△ Auto power saves: The remote will go into standby mode if no operation within 47s, the collar will enter into sleep mode if not receiving the signal in 5 minutes.
△ 3 Training Modes: Sound, 100 levels shock, and 100 levels vibration (Note: Treat your dog as friends, we suggest the static shock should always be your last choice, DO NOT use this mode to train young dogs)
△ Blue Backlit: Big LCD display with blue light design for night vision.
△ Up to 3 Dogs: You can train the 3 dogs with extra collars with 1 remote.
– Beep+Light+100 levels shock+100 levels vibration training;
– Rechargeable & waterproof (IP7 waterproof receiver collar);
– Remote blue backlit screen shows the current training method;
– Support for 3 dogs with extra dog collar;
– Power saving design with movement sensor;
– The collar length is adjustable from 14inch ~ 27.5inch;
– Recommended for dogs that weight at least 20lbs and are over 16 weeks old.
1. Press any button to wake up the remote and adjust levels of vibration or static shock above 0 with side ‘+ | -‘ button;
2. Press the ‘1/3’ button to select a signal channel(1, 2, 3);
3. Turn on the collar receiver, you will hear a long Bee~ and the red indicator stays on;
4. Press any function button of remote within 10sec to encode the signal, at the same time, the receiver beeps at once, which means the pairing is successful;
5. If you fail to match, please short press the power button again, Bee~ sound and stays on the red indicator means it’s ready to pair, then press any button on remote to pair;
6. If you have 3 receivers, press again ‘1/3’ button to select another signal channel for transmission encoding.
Tips: The long press is to turn off the collar, at the same time, the red indicator will flash twice, no sound send.
| Battery Capacity: | 300mAh |
| Standby Time: | 15-20 days |
| Charging Time: | 3 Hours |
| Frequency | 433.92MHZ |
| Waterproof Degree: | IP7 |
| Correction Mode: | 1. Sound; 2. Light; 3. Vibration; 4. Shock |
| Sleep Mode: | Remote: No operations within 47seconds; Collar: No operations within 5 minutes |
1. Please charge the remote and receiver for more than 5H at the first charging;
2. Please do NOT use this training collar for aggressive dogs;
3. When charging the receiver, it will go to sleep mode automatically, and no signal received from the remote;
4. Before training, let your dog wear the collar for about 5-7 days;
5. Please avoid leaving the collar on the dog for more than 8 hours per day, and please try to re-position the collar on the dog’ neck every 1 to 2 hours;
6. Examine the contact area daily for signs of rash or sores. If there is, stop using the collar until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian;
7. Please use vibration or tone mode first. Shock mode is only recommended in an emergency situation and not advised as a form of positive behavior training;
8. Make sure the collar receiver is properly worn, we recommend you put your finger into the collar, not too loose, otherwise, there will no effect on your dogs;
9. Please charge the set fully before you keep them idle for a long time, it’s necessary to charge them every month;
10. The remote dog training kit is recommended for medium / large dogs (weight: 20lb or above).
China First 5-Day Delivery Professional Pet Training Factory, OEM & ODM Available
We will contact you within 1 working day, please pay attention to the email with the suffix “@szlorewin.com”.
