Menu
△ Colorful Remote and TPU Choice: There is 4 colors option for the remote: Orange, Black, Yellow, and Red Or you can customize it.
△ Shock and Non-shock Version Choice: We also provide the vibration-only version to meet different countries’ rules.
△ Long Standby Time: For the remote is 300days, for the collar is 180days, and both items can be fully charged in 2H.
△ Rechargeable and Waterproof: Both remote and collar are rechargeable, the collar is IPX7 waterproof degree, but it can NOT be submerged in the water for a long time.
△ 3 Training Modes: Sound, 100 levels shock and 100 levels vibration (Note: Treat your dog as friends, we suggest the static shock should always be your last choice, DO NOT use this mode to train young dogs)
– Beep+Light+100 levels shock+100 levels vibration training;
– Rechargeable & waterproof (IPX7 waterproof receiver collar);
– Remote blue backlit screen shows the power status, trained dog, and current training method;
– Support for 3 dogs with extra dog collar;
– The anti-shock pads could prevent skin abrasion, it’s recommended to use 2-3 times a week;
– The conductive silicone caps are used to protect pets coats and skin;
– Long standby time: Remote is 300days, the collar is 180days;
– Recommended for dogs that weight at least 20lbs and dog’s neck size is 14-27.5inch.
1. Turn on the remote by press the power button;
2. Press ‘CH’ button to select a signal channel(CH1, CH2, CH3);
3. Adjust the level by pressing ‘+’ or ‘-‘ button, make sure the level is above 01;
4. Short press the power button of the receiver, you will hear a short bee~, and the indicator light is on;
5. Long press the power button until you hear a Bee~ and the indicator light flashes, please quickly press the ‘vibration’ button within 10s on the remote. If you hear the second sound Bee~, which means the pairing is successful;
6. If you fail to match, please click the collar power to turn off (1 LONG Bee~ means off), and then repeat step 5;
7. If you have 3 receivers, press again ‘CH’ button to select another signal channel for transmission encoding.
| Remote Battery: | 300mAh |
| Collar Battery: | 650mAh |
| Standby Time: | Remote: 300days; Collar: 180days |
| Charging Time: | 2 Hours |
| Waterproof Degree: | IPX7 |
| Correction Mode: | 1. Sound; 2. Light; 3. Vibration; 4. Shock |
| Sleep Mode: | Collar: No operations within 4 minutes, shake to wake up |
1. Please charge the remote and receiver for more than 5H at the first charging;
2. Please do NOT use this training collar for aggressive dogs;
3. When charging the receiver, it will go to sleep mode automatically, and no signal received from the remote;
4. Before training, let your dog wear the collar for about 5-7 days;
5. Please avoid leaving the collar on the dog for more than 8 hours per day, and please try to re-position the collar on the dog’ neck every 1 to 2 hours;
6. Examine the contact area daily for signs of rash or sores. If there is, stop using the collar until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian;
7. Please use vibration or tone mode first. Shock mode is only recommended in an emergency situation and not advised as a form of positive behavior training;
8. Make sure the collar receiver is properly worn, we recommend you put your finger into the collar, not too loose, otherwise, there will no effect on your dogs;
9. Please charge the set fully before you keep them idle for a long time, it’s necessary to charge them every month;
10. The remote dog training kit is recommended for medium / large dogs (weight: 20lb or above).
China First 5-Day Delivery Professional Pet Training Factory, OEM & ODM Available
We will contact you within 1 working day, please pay attention to the email with the suffix “@szlorewin.com”.
